| 品牌 | 湖州中科炉业科技有限公司 |
| 产地 | 浙江省湖州市长兴县 |
立式淬火炉表面淬火只对工件的表面或部分表面进行热处理，所以只改变表层的组织,而心部或其它部分的组织仍保留原来的低硬度、高塑性和高韧性的性能. 这样工件截面上由于组织不同性能也就不同。表面淬火便于实现机械化、 自动化，质量稳定，变形小，热处理周期短，费用少，成本低。
立式淬火炉设备采用耐热不锈钢做风道,料架采用高速起升,3～6秒内进水池.炉盖电动推杆升降,严格密封，使工件材料与外界空气隔绝，在加热、保温过程中，炉内有高强对流风机，炉内形成强对流循环，促使炉温均匀，炉内各点温差可控制在1℃内，从而使退火材料获得均匀一致的物理机械性能。
Vertical Aluminium Alloy quenching furnace
Surface quenching of this type furnace only heat treat the surface or part surface of the workpiece , so only change the surface tissue, while the inside and other parts still retain the original low hardness, high plasticity and high toughness.
Surface quenching is easy to achieve mechanization and automation. It is stable quality, small deformation, short heat treatment cycle, less expenses and low cost.
Vertical quenching furnace uses heat - resistant stainless steel for air duct, material rack is raised at high speed, only need 3-6 seconds to get into water channel. In the process of heating and heat preservation, there is a high strength convection fan in the furnace, and a strong convection circulation is formed in the furnace, which makes the furnace temperature uniform. The temperature difference of each point in the furnace can be controlled within 1℃, so that the anneal material can obtain uniform physical and mechanical properties.